Celastrol CAS NO.34157-83-0

It was determined by gas chromatography (GT-10). Use thermal conductivity detector. Use a column of 1.5 m (length), 6.35 mm (inner diameter). The column contains 20% polyethylene glycol 20M (Carbowax 20M) which is loaded on the 60/80 mesh diatomaceous earth carrier. Alternatively we can use other components that can separate diacetyl, water and methylacetyl alcohol. The following conditions were used: the sample was 2 μg; the injection temperature was about 195 ° C; the column temperature was about 130 ° C and the detector was about 230 ° C; the flow rate of the carrier gas was about 35 ml per minute. The average residence time: 2 min 15S for diacetyl, 3 min for water, and 12 mins for methyl acetyl alcohol. The peak area of the resulting methylacetyl alcohol shall not be less than 96.0% of the total area of all peaks

3-Hydroxy-2-butanone is a ketone and alcohol. Ketones are reactive with many acids and bases liberating heat and flammable gases (e.g., H2). The amount of heat may be sufficient to start a fire in the unreacted portion of the ketone. Ketones react with reducing agents such as hydrides, alkali metals, and nitrides to produce flammable gas (H2) and heat. Ketones are incompatible with isocyanates, aldehydes, cyanides, peroxides, and anhydrides. They react violently with aldehydes, HNO3, HNO3 + H2O2, and HClO4. Flammable and/or toxic gases are generated by the combination of alcohols with alkali metals, nitrides, and strong reducing agents. They react with oxoacids and carboxylic acids to form esters plus water. Oxidizing agents convert them to aldehydes or ketones. Alcohols exhibit both weak acid and weak base behavior. They may initiate the polymerization of isocyanates and epoxides